Type 2 Socket 22KW 32AMP 400V Module 3 AC EV Charger Station With
MID Certified
EV Charger Station Charging Procedure
Follow these steps for easy charging
1. Pull up to the charging point and turn off car.
2. Make sure car is unlocked with no charge settings/timers turned
on.
3. Plug the Type 2 Male end into the charging unit - The LED will
turn SOLID BLUE.
4. Plug the Type 2 Female end into your cars charging port - The
LED will turn SOLID GREEN.
5. Lock your car and leave to charge. (Also locks the cable if car
supports)
6. After charging always remove the plug from the car first and
then the charging unit.
a. Amp Selector on the side of the unit allows you to change
between 6A, 13A, 16A, 32A. Allowing you to install on any power
supply.
b. Built-in 6 mA DC Sensitive fault protection device which
conforms to the 18th edition wiring regulations, meaning no Type B
RCD needed at source.
c. Product built from the ground up to be easy to install and
maintain.
EV Charger Station Features:
| Model Name | EVC10-07C1S | EVC10-07C1C | EVC10-22C1S | EVC10-22C1C |
| Input Rating | 230±10%Vac (One Phase) | 400±10%Vac (Three Phase) |
| Frequency | 50Hz |
| Input Current | 32A |
| Output Current | 32A |
| User Authentication | RFID (ISO 14443) |
| External | LAN (optional) + 4G (optional) or Wi-Fi (optional) |
| Internal | OCPP 1.6 JSON (OCPP 2.0 compatible) |
| Operating Temperature | -22˚F~122˚F(-30˚C~50˚C) |
| Humidity | Max. 95% RH |
| Altitude | ≦ 2000m |
| IP Level | IP 54 | IP65 for box | IP 54 | IP65 for box |
| Dimension(WxDxH) | 350x250x175mm (13.8″x9.8″x6.9″) | 350x250x130mm (13.8″x9.8″x5.1″) | 350x250x175mm (13.8″x9.8″x6.9″) | 350x250x130mm (13.8″x9.8″x5.1″) |
| Charging Outlet | One Socket | 5M Cable | One Socket | 5M Cable |
| RCD | RCD TYPE B |
| Charging Interface | Type 2 Plug |
| Multiple Protection | Over current, Under voltage, Over voltage, Residual current, Surge
protection, Short circuit, Over temperature, Ground fault, Current leakage
protection |
